With TAX 21% Without TAX
RSP CONIC GO
RSP WALL GO
RSP WALL GO
RSP WALL GO
RSP WALL GO
RSP WALL GO

RSP WALL GO

The aim of this machine is to be able to work the upper body at high intensity, developed for the work of large muscle groups, traction and combined cycles of traction and push.

This machine has a great internal development seeking to soften the eccentric peak minimizing the risk of joint injury in the change of cycle.

We work on the weight of the inertia disc, the radius of the shaft and the counterweights until we find values that, depending on the physical level of the sportsman, do not pose a risk to the joint at the moment the change of direction of the force occurs (beginning of the eccentric phase).

UAUUSUAW
€1,197.90 With TAX 21% €990.00 Without TAX
Tax included

 

TECHNICAL SPECIFICATIONS
Developed for high intensity work of the upper train, tensions, tractions.

Fixed radius axle, speed differences are only caused by the application of force from the subject.

Built in aluminum.

Ropes without stretching coefficient, which reduces the loss of inertia.

Low friction bearings and high quality pulleys.

Multiplication of the shot 1 x 2 to promote the eccentric work.

Adjustment of the moment of inertia by means of masses integrated in the disc, 3 moments of inertia (0 masses. 2 masses, 4 masses)

We eliminate interference from vibration and friction.


Measures: 28 x 30 x 30 cm high.
Weight: 5.8 kg.
Delivery: Delivered with hand grip, head pulley, 4 m of rope and 4 aluminium masses.
Accessories: Possibility of building portable aluminium structures with customised wheels.
Rope and pulley spare parts kit.
Portability kit to fix the machine to a solid structure such as a goal, backrest, column.
https://einercial.com/categoria-producto/rsp-wall/accesorios/
Adaptations: Customization for specific jobs.

MOMENTS OF INERTIA
Without masses: 184,44 Kg/cm²
2 masses: 221,32 kg/cm²
4 masses: 258,22 Kg/cm²


COMPONENTS


4 Aluminium masses (10 % moment of inertia for each mass)

1 inner pulley.

1 Wall outlet pulley with 1 x 2 reduction gear.

1 Hand grip.

2 m rope of 2 m of 4mm dyneema.

3 screws and 1 eyebolt (To fix the machine to the wall).

1 assembly manual